Lenovo System x ServeRAID M5210 SAS/SATA, 46C9110

Technical specifications

The ServeRAID M5210 and M5210e
SAS/SATA controllers have the following specifications:

LSI SAS3108 12 Gbps RAID on
Chip (ROC) controller.

PCI low profile, half-length –
MD2 form factor (M5210) or onboard chip (M5210e).

Eight internal 12 Gbps
SAS/SATA ports (support for 12, 6, or 3 Gbps SAS speeds and 6 or 3 Gbps SATA
speeds). Up to 12 Gbps throughput per port.

Two internal x4 HD Mini-SAS
connectors (SFF-8643).

PCI Express 3.0 x8 host
interface.

Support for RAID 0, 1, and 10
standard; support for RAID 5, 50, 6, and 60 with optional upgrades.

Optional onboard data cache
(DDR3 running at 1866 MHz) with the choice of the following backup:

1 GB (no battery backup)

1 GB, 2 GB, or 4 GB with flash
backup

Support for SAS and SATA HDDs
and SSDs.

Support for intermixing SAS
and SATA HDDs and SSDs. Mixing different types of drives in the same array is
not supported.

Connections to up to 32
internal drives, depending on the Server model.

Optional support for
self-encrypting drives (SEDs) with MegaRAID SafeStore.

Optional support for SSD
performance acceleration with MegaRAID FastPath and SSD caching with MegaRAID
CacheCade.

Support for up to 64 virtual
disks, up to 128 arrays, up to 16 virtual disks per array, and up to 32
physical drives per array.

Support for logical drive
sizes greater than 2 TB.

Support for Integrated
MegaRAID (iMR) mode (no cache memory upgrades installed) or MegaRAID (MR) mode
(requires 1 GB, 2 GB, or 4 GB cache memory upgrade).

iMR
mode supports (no cache memory upgrades installed) the following features:

·        
RAID 0, 1, and 10, and, optionally, 5 and 50

·        
Fixed stripe unit size of 64 KB

·        
Self-encrypting drives with optional Zero
Cache/RAID 5 upgrade

·        
Both RAID and JBOD (pass-thru mode with system
drives) configurations

–       Up to
16 drives are supported in a RAID configuration.

–       Up to
63 drives are supported in a JBOD configuration. (JBOD drives can be used as
bootable drives.)

MR
mode supports (1 GB, 2 GB, or 4 GB cache memory upgrade required):

·        
RAID 0, 1, 10, 5, and 50 and, optionally, 6 and
60 (Non-RAID is not supported.)

·        
Configurable stripe unit size from 64 KB up to
1 MB

·        
Self-encrypting drives

·        
Optional SSD performance features (FastPath and
CacheCade)

Compliant with Disk Data
Format (DDF) configuration on disk (CoD).

S.M.A.R.T. support.

MegaRAID Storage Manager
management software.